Epoxy self-leveling wear resistance is very high, clean effect is also good, so many customers like, construction companies do epoxy self-leveling a lot of times, then, how to test whether the epoxy self-leveling is qualified, the following is a detailed introduction to the acceptance standards of eptance of epoxy self-leveling, I hope it will be useful to everyone. Acceptance criteria for epoxy self leveling works:
First, self leveling floor fullness. Fullness is to see whether the reflection rate of the ground can reach 95%, and whether it is full enough. This index was not taken seriously in the past, but with the progress of society and people's requirements gradually improved, this index has gradually become a basic technical requirements. Less than 85% of the total reflectance is unqualified.
Two. Hardness of self leveling flooring. In order to make the ground have enough wear resistance, many customers will require a certain hardness on the surface of the floor. In order to meet the requirements of industrial use, we generally require that the hardness of the floor is greater than 2H. But the hardness of the self-leveling solidified filler is not too high, so it is better to choose the filler which is not easy to sink.
Three, self leveling floor surface quality. Epoxy resin self-leveling floor is a kind of surface smooth, beautiful, with excellent decorative effect of a floor, so when acceptance, to see clearly whether the surface of the flat, bright to mirror effect, and can not contain particles and other impurities.
标签:   铝艺大门 铝艺护栏 常州铝艺大门