公司立足常州地区经营产品涵盖铝艺围墙护栏、锌钢企业护栏、各式铝艺阳台护栏、铝艺大门、铝艺楼梯扶手、门窗系统,车库门、新型阳光房等多领域。

示例图片三
网站首页 > 新闻资讯 > 业界资讯

常州庭院铝艺大门加工工艺流程?

2018-06-09 09:44:58 常州市星火铝艺制品有限公司 阅读

铝艺庭院常州铝艺大门属于建筑装饰五金类别,归属五金钣金加工,大致钣金加工工艺如下:

1、选用冷锻性能较好的铝材,进行人工锻打,加工出表面的花纹。

2、对冷锻不足的细节部分,进行手工打磨,确保纹路和花型尽量一致完美。

3、铝艺庭院门是钢模铸造工艺,为了更好的光洁度和美观性,在铸造后进行锻打加工和抛光处理。

4、根据大门高度进行切割分段,对切割处进行打磨坡口。目的是加强该艺术大门的美观性。

5、对焊接后的大门进行打磨,分为粗磨和精磨两道工艺,确保型美观无焊接点,接头处过度自然无焊接迹象。

6、最后对铝艺庭院门进行塑膜小包装,送往收货地。

常州铝艺大门|常州铝艺护栏

The aluminum art courtyard door belongs to the architectural decoration hardware category, belongs to the hardware processing, the roughly processing craft is as follows:

1, choose the aluminum products with better cold forging performance to manually forge and process the surface patterns.

2. Manual polishing is needed to ensure that the details of the cold forging are not as perfect as possible.

3. The aluminum art courtyard door is a steel mold casting process. For better finish and aesthetics, it is used for forging and polishing after casting.

4. Cut the section according to the height of the gate and grope the groove on the cutting place. The aim is to strengthen the beauty of the art gate.

5. Grinding the gate after welding is divided into two processes, rough grinding and fine grinding, to ensure that the appearance is beautiful without welding points, and the joints are excessively natural without welding signs.

6, finally, the aluminum art courtyard door plastic film small package, sent to the receiving place.


标签:   钣金加工 铝艺大门 常州铝艺大门