公司立足常州地区经营产品涵盖铝艺围墙护栏、锌钢企业护栏、各式铝艺阳台护栏、铝艺大门、铝艺楼梯扶手、门窗系统,车库门、新型阳光房等多领域。

示例图片三
网站首页 > 新闻资讯 > 业界资讯

铝艺大门洞口测量前有那些准备工作要做?

2018-06-09 09:29:52 常州市星火铝艺制品有限公司 阅读

常州铝艺大门的测量就是对常州铝艺大门洞进行宽度、高度、厚度及特殊情况的实地测量,以确认实际所需大门的尺寸,那么,在测量前我们应该注意什么呢?

一、客户和施工负责人必须在现场;

二、水电改造及墙体改造必须完工;

三、水平线具备,厨卫墙、地砖需要铺好,铺地板的房间需要地面找平做好。墙、地砖、地板的高度要确定;

四、确定平墙是否要增加墙垛;

五、测量完毕必须三方签字。

为了确定好铝艺庭院大门的正确高宽度,大家在测量前应该做好以上准备钣金加工

The measurement of the gate of aluminum is to measure the width, height, thickness and special situation of the gate, so as to confirm the size of the actual gate, so what should we pay attention to before the measurement?

1. The customer and the person in charge of the construction must be on the scene.

Two, the reconstruction of the hydropower and the reconstruction of the wall must be completed.

Three, horizontal line, kitchen and wall tiles, floor tiles need to be paved, the floor of the room needs leveling. The height of the wall, floor tile and floor should be determined.

Four, determine whether the wall should increase the wall stacks.

Five, the measurement must be signed by three parties.

In order to determine the correct height and width of the aluminum art courtyard gate, we should do the above preparation before measuring.


标签:   钣金加工 铝艺大门 常州铝艺大门