Epoxy floor paint is a common floor decoration material, mostly used in basketball courts, factories, hospitals and other large venues. Because of the characteristics of epoxy floor paint, when painting epoxy floor paint, it is not like painting walls, so many owners do not know how to construct epoxy floor paint, and some others do not. The owner will ask if the floor paint can be painted by himself. The following is a brief introduction to the construction of epoxy floor paint. Doubtful owners to a simple understanding of it!
I. Can I paint the floor by myself?
The construction of floor paint is not difficult, but it is more troublesome for Xiaobai who has no construction experience. Many owners want to brush their own floor paint, if it is a small area of floor paint, and with construction experience, they can also brush their own floor paint. If there is no construction experience, it is recommended that professional builders be invited to brush the floor paint safely. If it is a large area of floor paint, it is suggested that professional construction personnel should be invited to paint. If you really want to brush, you can also first small area experiment to determine the effect of your own construction is possible, you can also brush yourself.
II. How to Construct Epoxy Floor Paint
During the construction of epoxy floor paint, the construction scheme should be formulated according to the performance of the required floor coating. Generally speaking, the floor of workshop such as mechanized chemical warehouse can be constructed according to the conventional process.
1. Routine Construction Procedures of Epoxy Floor Paint
Base treatment sealing primer epoxy mortar strengthening layer putty topcoat.
2. Specific construction scheme
(1) Base treatment: If it is for the construction of concrete ground with more oil pollution, 10%-15% hydrochloric acid can be used to clean it, and then rinse it with clean water after cleaning; if it is for the large area of concrete ground, it can be directly polished with an electric grinder, and surface sand needs to be removed. Dust, oil and other debris.
(2) Sealing primer: After mixing the components A and B of epoxy primer evenly, use mud plaster tool to coat the roller on the base surface, at least twice, so that it can be fully wetted and penetrated into the interior of concrete, which has a good bond strengthening effect.
(3) Reinforcement layer of epoxy mortar: Mixed quartz sand with different particle sizes can be added to waterborne epoxy coatings, and then mixed epoxy floor paint can be stirred evenly. The coating can be made to a certain thickness by coating method, which can effectively enhance the impact resistance and roll resistance of the floor.
(4) Putty: After the epoxy mortar layer is fully cured, two waterborne epoxy putty layers will be scraped in batches and polished after drying, mainly to prepare for the back painting.
标签:   铝艺大门 环氧地坪 常州铝艺大门 常州铝艺护栏 铝艺大门厂家