How can the biomass hot stove not be transmitted automatically? 1. the wearing of biomass hot stove is incorrect. Open the right door and wear the belt correctly according to the instructions of the tape or the sketch map. 2. the potentiometer of the length control of biomass hot blast stove is zero. The belt length control potentiometer is left in second positions on the front panel switch board. If the clockwise direction is adjusted, the length of the strip will be long and vice versa; if it is in the zero position, it will not be taken out.
3. the PP belt is too thick or too thin.
Because PP packing belt manufacturers have many, thickness is not the same, should be selected according to the requirements; if not possible, please follow the method of page 10 of the instructions, carefully adjust the gap between the feeding and returning rollers.
4. there are foreign objects in the extension.
The long-term use of biomass hot-blast stove fails to be cleaned and maintained in time, resulting in the accumulation of stolen goods in the machine, which makes the delivery not smooth and comfortable, and should be cleaned and maintained more.
5. the belt gap is incorrect.
The clearance between the feeding rollers of a pair of semi-automatic biomass hot blast stoves is very important for normal feeding. The adjustment of the clearance refers to the instructions on page 10 of the manual. Carefully adjust, transfer to the belt roller clearance only more than the thickness of the belt 0.05~1mm.
6. electromagnet work is not normal.
The electromagnet does not work. First check whether the soldering head of the solenoid is falling off, and check if the coil is burnt out. If neither of them is abnormal, check whether the electromagnet is displaced or blocked by stolen goods, so that the bullet can not move freely.
标签:   铝艺大门 铝艺护栏 常州铝艺大门 常州铝艺护栏 铝艺大门厂家 热风炉