公司立足常州地区经营产品涵盖铝艺围墙护栏、锌钢企业护栏、各式铝艺阳台护栏、铝艺大门、铝艺楼梯扶手、门窗系统,车库门、新型阳光房等多领域。

示例图片三
网站首页 > 新闻资讯 > 业界资讯

工业厂房环氧地坪如何保养(收藏版)

2018-11-02 18:34:12 常州市星火铝艺制品有限公司 阅读

环氧地坪是一种高强度、耐磨损、美观洁净的地面,根据用途要求有多种环氧地坪系统,如电子厂房常用的环氧防静电地坪,食品厂常用聚氨酯砂浆环氧地坪,烟厂常用环氧彩砂等。环氧地坪漆是高价值、高质量、高要求的产品,正确的使用方法和维护保养可使地面常保如新,并且可以保长使用年限。那么,如何保养和维护环氧地坪呢?以下是北京航特地坪漆给您提出的具体建议:

Epoxy floor is a kind of high-strength, wear-resistant, beautiful and clean ground. According to the requirements of use, there are many kinds of floor systems, such as epoxy anti-static floor commonly used in electronic factory, polyurethane mortar floor commonly used in food factory, epoxy color sand commonly used in tobacco factory, etc. Epoxy floor paint is a high-value, high-quality and high-demand product. Proper use and maintenance can keep the floor fresh and prolong the service life. Then, how to maintain and maintain the epoxy floor? The following are the specific suggestions for Beijing Aerospace paint. 


1、环氧地坪施工完毕后,在保养期内切勿使用,养护5-7天,避免其他液体浸润表面,并须加强通风设备及防火措施。

1. After the construction of epoxy floor, do not use it during the maintenance period. Maintain for 5-7 days to avoid other liquid infiltrating the surface, and strengthen ventilation equipment and fire prevention measures.

2、环氧地坪使用,生产人员不准穿有铁钉的皮鞋在上面行走,建议现场人员换成橡胶底鞋或者洁净鞋;一切工作器具都须有固定专用车架安放,严禁带有锐角的金属零件等物件碰撞地面,造成地面涂层损坏。

2. When using epoxy flooring, production personnel are not allowed to walk on it with nailed leather shoes. It is suggested that field personnel should replace rubber soles or clean shoes; all working instruments should be installed with fixed special frame, and metal parts with sharp angles should be strictly forbidden to collide with the ground, causing damage to the ground coating.

3、现场安装设备等重大物件须用起重机械时,在接触环氧地面的支撑点应有厚橡皮等软件材料垫妥,严禁用铁管等金属在环氧地面上接拖设备;叉车、铲车卸货时注意货物平放,避免货物侧侄、拖、拽刮伤环氧地面,各车辆在运行时尽量避免刹车,在环氧上急刹车很容易产生胎痕,而且还清理不掉。

3. When installing equipment and other major items on site, the supporting points should be padded with thick rubber and other software materials. It is strictly forbidden to use metal pipes to connect and tow equipment on the epoxy ground. Forklift trucks and forklifts should pay attention to the placing of cargo when unloading, so as to avoid cargo side nephew, towing and scratching the epoxy ground. During operation, brake is avoided as far as possible. Brake on epoxy is easy to produce tyre marks, and it can not be cleaned up.

4、现场进行电焊等高温作业时,在电焊火花飞溅到的地方应用石棉布等耐火材料铺垫好,以防烧坏环氧地坪

4. When conducting high-temperature operation such as welding on site, the asbestos cloth and other refractories should be used to pave the place where welding sparks splash to prevent burning down the epoxy floor.

5、一旦地坪有损坏,及时使用环氧地坪漆修补,以免油污通过损坏处渗透到水泥里,造成大面积涂料脱落。

5. Once the floor is damaged, use epoxy floor paint to repair it in time, so as not to penetrate into the cement through the damaged area, resulting in a large area of paint peeling off.

6、现场内大面积清洗环氧地面时,不要用强化学溶剂(甲苯、香蕉水等)一般使用洗涤剂、肥皂液、清水等,用清洗机进行,在没有清洗机的情况下,可用锯木粉撒上后再清扫干净。

6. When cleaning epoxy floors in large areas on site, do not use intensified chemical solvents (toluene, banana water, etc.) generally use detergents, soap liquids, clean water, etc., and use a cleaning machine. In the absence of a cleaning machine, sawdust can be sprinkled before cleaning.



标签:  利用大美女 铝艺大门 常州铝艺大门 铝艺护栏 常州铝艺护栏 环氧地坪