公司立足常州地区经营产品涵盖铝艺围墙护栏、锌钢企业护栏、各式铝艺阳台护栏、铝艺大门、铝艺楼梯扶手、门窗系统,车库门、新型阳光房等多领域。

示例图片三
网站首页 > 新闻资讯 > 铝艺大门

常州铝艺大门表面的撞痕如何修复

2018-10-27 19:30:53 常州市星火铝艺制品有限公司 阅读

在日常使用常州铝艺大门中难免出现磕磕碰碰,也难免会有这样那样的撞痕,既不美观也缩短了常州铝艺大门的使用寿命。那么除了平常尽量不用硬物撞击常州铝艺大门之外,还有注意维护保养,对已经形成的撞痕我们要做以下修复处理:

In the daily use of Changzhou aluminium art gate, it is unavoidable to bump, there will be such a bump, not only beautiful but also shorten the service life of Changzhou aluminium art gate. So in addition to the usual as far as possible do not hit the door with hard objects, but also pay attention to maintenance, the formation of the impact marks we have to do the following repair treatment: 在漆过的常州铝艺大门表面上,必须去除受损区域周围的面漆。用细砂纸小心去除撞痕周围约1.3厘米处的面漆。要使撞痕中的常州铝艺大门表面隆起,先在撞痕处利用专业工具轻轻敲打隆起部位,但不要敲打整个表面,这样处理能消除以隆起的撞痕了,特别是在撞痕较浅和较软的情况下。

On the surface of painted aluminum doors, top coat must be removed. Carefully remove the top coat about 1.3 centimeters around the impact mark with fine sandpaper. To make the aluminium gate surface uplift in the crash mark, tap the uplift part gently with professional tools at the crash mark, but do not tap the whole surface. This treatment can eliminate the bump mark, especially in the case of shallow and soft crash marks.

如果这种方法不奏效,把布浸入水中,拧出水。将湿布折叠几层后覆盖在撞痕上,用专业工具紧紧地压住布。

If this method does not work, dip the cloth into the water and wring the water out. Fold the wet cloth several layers and cover it on the impact mark and press the cloth tightly with professional tools.


标签:   铝艺大门 铝艺护栏 常州铝艺大门 常州铝艺护栏 常州别墅大门